Black Toro RM 035 Americas Gold Side
Style: Men
Grade: Super Clone
Movement: Integrated movement（VS Real: 4.3g Manual-winding skeleton movement)
Function: Basic three-hand display
Length (lug-to-lug): 48.00 mm
Case width (excluding crown): 39.70 mm
Thickness: 12.5 mm（VS Real: 12.25 mm）
Weight: 80 g ( VS Real: 50 g )
Dial: Skeletonized/Openworked
Bezel: ultra-fine industrial ceramic (VS Real: Black TZP ceramic )
Side: Rose gold plating (VS Real: 18k rose-gold )
Case back: ultra-fine industrial ceramic (VS Real: Black TZP ceramic )
crown: Black + carbon fiber
Dial shape: Tonneau
Strap: Sulphur-Cured Black Rubber
Clasp: Double Folding Deployant Grade 2 Titanium
Power Reserve: 40 - 48 H （VS Real: 50-55 H)
Water Resistance: 20 m （VS Real: 50 m)
Material: Rose gold plating, ultra-fine industrial ceramic
Luminous: Luminous pointer
Box: Original papers, Original box, Original parts, Warranty, Limited edition
Description
Richard Mille Black Ceramic Super Clone RM 035 Black Toro Americas Gold Side Replica Watch
Black Toro
It features a black ceramic bezel and rose gold case sides; it was launched on August 4, 2017—the same day as the RM 035 Gold Toro (which has an all-rose-gold case)—making them a twin series. The key difference is its lighter weight: it weighs just 50g, whereas the all-rose-gold model weighs approximately 100g. It embodies the spirit of Rafael Nadal—his relentless drive, immense power, and tireless energy on the move.
It is a pure manual-winding skeletonized watch; notably, the component at the 6 o'clock position is a standard balance wheel rather than a rotating tourbillon—a common point of confusion. The RM 035 series was created specifically to provide Nadal with a timepiece rugged enough to withstand the rigors of competitive play, allowing him to swing his racket without restraint. The series' core innovation lies in the omission of the tourbillon; instead, it utilizes a skeletonized framework made of titanium featuring a simple three-hand display. The movement passed the grueling Chronofiable® accelerated aging and extreme shock-resistance tests; weighing just 4.3 grams, it is capable of withstanding shocks of up to 5,000 Gs.
Craftsmanship: Genuine vs Super-Clone
Genuine Product:
Its bezel and case back are made of black TZP ceramic with a sandblasted finish, giving it a high-quality matte effect and excellent scratch resistance and extremely low thermal conductivity. The middle case is made of 18K rose gold with a finely satin-brushed finish. The crown is made of NTPT carbon fiber with a black rubber protective ring. Its most distinctive feature is the skeletonized RMUL1 manual-winding movement. The movement's baseplate and bridges are entirely made of Grade 5 titanium alloy treated with PVD, resulting in a total movement weight of only 4.3g.
This Top Replica:
The bezel and case back are made of ultra-fine industrial ceramic similar to Rolex bezels, also with a sandblasted matte finish and chamfered polished edges, achieving approximately 95% of the visual and tactile refinement of the genuine product. The side middle layer uses 904L steel as the base, and the surface is treated with a "vacuum gold plating" process, making the red gold brushed lines and color very realistic when first handled. Furthermore, this Super Clone RM 035 Black Toro features an upgraded highly transparent, scratch-resistant sapphire crystal, and mimics the genuine article with a double-layer high-definition colorless/micro-violet anti-reflective coating, allowing for a clearer view of the integrated movement when the dial is tilted.
This watch replicates the structure of the RMUL1 movement, with its gear train, mainspring barrel, and shock absorber meticulously arranged according to the original blueprints, ensuring that every core gear and pivot on the dial side is functional. The movement's framework is, as always, crafted from Grade 2 titanium and treated with PVD sandblasting and Titalyt finishing. The movement weighs approximately 15-20 grams; although it doesn't quite achieve the original's exceptionally light weight of only 4.3 grams. Meanwhile, all the skeletal structures, like the genuine article, have a matte, deep black finish, which distinguishes it from the all-rose gold RM 035.
A custom-designed gear train has been created, successfully placing the actual balance wheel at the exact same 4 o'clock position as the genuine article. When you turn the crown to wind the watch, the balance wheel of this Ceramic RM 035 Black Toro Super Clone watch immediately begins to oscillate rapidly from side to side. The only flaw is that the genuine balance wheel is completely clean above, without any extra metal levers. Upon close inspection of the balance wheel bearing on this replica, two small, protruding metal adjusting pins (the regulator) can often be seen. Although John Studio uses fake decorative pieces to conceal the regulator pins, these flaws are still visible under high magnification. It weighs approximately 80g, whereas the genuine product weighs about 50g.
This meticulous attention to detail is reflected across our entire lineup of super clone richard mille timepieces, where luxury meets flawless execution.
Low-end Replica:
The black bezel and case back are made of ordinary alloy sprayed with black paint; they lack the smooth, warm tactile quality of ceramic. The rose-gold middle section is certainly not gold-clad or solid gold, but rather the cheapest form of electroplated gold. The color tends to take on a purplish hue or an unnaturally garish gold sheen, and prolonged wear leads to fading caused by sweat corrosion. The densely packed gears and mainspring barrels visible from the front are merely decorative elements—they remain completely stationary. The watch weighs approximately 120g.
Shock Absorber and Gemstone Color
This ceramic RM 035 Black Toro super clone watch , features high-purity, "pigeon-blood" red synthetic gemstones and a high-precision micro-carved replica of the iconic shock absorber—the most immediately recognizable feature distinguishing it from other versions of the replica.
Water Resistance
This top replica watch features a waterproof gasket embedded in the gaps between the bezel, middle layer, and case back. These are then tightened longitudinally with 12 titanium spline screws using extremely high and even torque, completely sealing the gaps in the case by deforming the rubber under pressure. A crucial element is the crown; as a manual-winding watch, the crown is frequently turned, resulting in significant wear. The genuine watch uses a Torque-limiting crown and a complex diving-grade patented sealing kit, while this replica, limited by cost, uses a traditional push-pull crown structure, relying solely on a rubber gasket inside the crown tube for physical sealing. While its water resistance exceeds that of the RM 11 Super Clone series, reaching 20 meters, it's only sufficient for everyday water contact (such as handwashing, sweating, or light rain). It is worth noting that even though authentic watches may have a water-resistance rating of 50 meters, in practice, this is limited to protection against everyday exposure to water; engaging in activities such as swimming, diving, surfing, or showering still carries significant risk. This is primarily due to the complex "sandwich" construction, tonneau-shaped case, and signature five-screw design of RM watches.
Manufacturer: John Levels Up
Product code: Black Toro RM 035
Material provider: Swiss
Assembly Origin: China
Production Date: December 2025
